Molecular sieve 13x is the sodium form of the type X crystal and has a much larger pore opening than the type A crystals. It will adsorb molecules with a kinetic diameter of less than 10 Angstrom and exclude those larger. It also has the highest theoretical capacity of the common adsorbents and very good mass transfer rates. It can remove too large to fit type A crystal and is commonly used to separate nitrogen from oxygen.

Formula:

Na86 (AlO2)86(SiO2) : XH2O

Hand & Storage Recommendation

The pore size of 3A molecular sieve is 3Ǻ. It does not adsorb any molecular larger than 3 Ǻ. According to the industrial application specialities. We endure our products with the characters of higher adsorption speed, stronger crushing and anticontamination resistance, more cyclic times and longer work-span. All these advantages have made it come to be the most essential and necessary desiccant in the fields of the deep drying, refinery, polymerization for cracked gases, ethylene, propylene and any other non-acidic gases or liquids in petroleum and chemical industries.

The pore size of 13x molecular sieve(APG) is about 10 A. It can adsorb any molecular smaller than 10 A mainly used as catalyst carrier, coadsorbtion of CO2 and H2O and H2S as desiccant for medical and air compressor systems and can also be adjusted to fit other various applications.

Impregnated Activated Alumina with potassium permanganate KMNO4. This is highly porous material this material can have a surface area significantly over 200 square metres/g. High quality High crush strength power, which limits dusting, is important during loading of desiccant towers. High crush strength makes alumina effective as a prebed material when used with other types of desiccants.

1. Properties:

1.1. Activated Alumina content: 75~85wt%.

1.2. Potassium permanganate content:3~5 wt%.

1.3. Humidity≦22 wt%.

1.4. Particle size3.2~3.8mm.

The pore size for 5A molecular sieve is about 5Ǻ. It can adsorb all kinds of molecular smaller than this size, it is mainly used in separation of the normal and isomerous alkane; pressure swing adsorption (PSA) for gases; co-adsorption of moisture and carbon dioxide. Based on the industrial application specialties, we have produced out our own PSA molecular sieve products, which have better selective adsorb ability and more rapid adsorption speed, being the elaborated products, it could suitable for gases generation and concentration PSA plants of any sizes and any types in the world.

Swimming pool chemical, algicide, biocide, oxidant.

Calcium Hypochlorite is most powerful chlorine source and one of the best industrial strength chlorinators.
DIRECTION : Crush the tablet in to fine Powder and dissolve in 20 Liters of water. Stir and allow to dissolve for half an hour to One hour for better Chlorine action.

 

This product is  γ-form white spheric  active aluminium oxide, which is used for the recovery of sulfur from acidic gas containing sulfur by liquefaction in petrochemical industry. The product is prepared from intermediate raw materials of quick dehydration process production. It has the feature of high crushing strength, low adsorption rate, good activity, long period of service life, good physic-chemical properties and high catalytic activity etc.

The molecular sieve powder has the effective performances of adsorption and selectivity. it is suitable with application of insulating glass desiccant, refrigerant desiccant. 

Formula:

K7.2Na4.8[(AlO2)12 (SiO2)12]m H2O

Precaution:
 

Diglycol Amine supplier and Exporter. Diglycolamine is a colorless, slightly viscous liquid with a mild amine odor. DGA is miscible with water, alcohols, and aromatic hydrocarbons, but relatively immiscible with aliphatic hydrocarbons and ethyl ether.

Chemical Names: 2-(2-AMINOETHOXY)ETHANOL, Diglycolamine, 929-06-6, 2-Aminoethoxyethanol, Ethanol, 2-(2-aminoethoxy)-, Diethylene glycol amine

• Used for carbonyl sulfide (COS) removal from liquid hydrocarbon streams

• Used as a selective solvent for recovery of aromatics from refinery streams