Separator Disc Cleaner manufacturer and supplier in India, Middle East, Oman, Canada, Africa
RXSOL-16-1007-210 is a liquid blend of organic solvent with heavy duty & concentrated emulsifying Acidic agents, which is developed for cleaning stainless steel separator discs. An extremely effective for removal of SALT DEPOSITION (Salts of Calcium Carbonate etc.) burnt grease , carbon deposit , oily residues and lacquers found in fuel oil and lube oil purifiers and filters. NOTE:- Mechanical cleaning ( Scrubbing and Brushing ) damage to discs which results in poor performance.
Characteristics:-
• Formulated to remove heavy tenacious deposits.
• Allows cleaning of discs without dismantling of disc stacks.
• Reduces downtime.
• Improves efficiency of centrifuge installation.
• Cleans down to metal surfaces.
• Cleans all types of separator discs
Disc Separator Cleaner easily removes Burnt grease, carbon deposit, oily residues and lacquers found in fuel oil and lube oil purifiers and filters.
FIELDS:-
A very fast & effectively removes without the need of Scrubbing and Brushing of Centrifugal Separators, Disc & all types of heavy tenacious deposits which collect in fuel & lube oils centrifugal separators disc stacks.
Flash point cc : None
IMO-Code : 8-2031-T700.
NATURE OF SPECIAL RISKS AND SAFETY ADVICE
In accordance with the latest E.E.C. Council directives:
R 36 : Irritating to eyes and skin.
S 2 : Keep out of reach of children.
S 28 : After contact with skin rinse immediately with plenty of water.
For General cleaning it Should be diluted ,at the rate of 1-parts RXSOL-16-1007-210 to 5-parts water,( Or 1:1 ratio of any solvent like diesel ) before use or depend on nature of dirt / contamination . For Heavy deposition , immerse the stainless Steel DISCS in the container with concentrated RXSOL-16-1007-210 for 15 minutes to 3 Hrs. At 50 to 60°C ( Heating is not necessary ) .
After the unit or parts have been satisfactorily cleaned, remove the discs by using RUBBER GLOVES and rinse thoroughly with fresh water. It is recommended that this product is not used on soft metal, Zinc,Tin, Galvanized surfaces or Anodized Aluminium. Then separator discs can be used immediately.
NOTE:-
Recirculation and heating will improves the cleaning action.
