Citric Acid exporter and supplier in Muscat Oman, Al Qusais, Deira, Saif Zone, Fujairah, Sharjah, Dubai, Abudhabi, Ajman, Diera, UAE Middle East, Al Quoz, Jebel Ali, Umm Al Quawain, Ras Al Khaimah, Masafi, Khor Fakkan, Al Hayl, Al Ain, Ras Al Khor Industrial Area, Al khubaisi, Um Ramool Industrial Area, Al Qusais Industrial Area, Jebel Ali
We are also popular citirc acid supplier in India in Mumbai, Navi Mumbai MIDC, Taloja, Gandhidham, Chennai, Visakhapatnam, Kolkata, Howrah
CITRIC ACID is a source of hydrogen ions (H+) used to reduce the pH of a drilling fluid. Both liquid and powdered. CITRIC ACID provides a layer of hydrogen ions around active clays, reducing their zeta potential and thus reducing their ability to imbibe water. This function translates to fewer solids, less swelling of the solids in the drilling fluid, reduced wellbore swelling, and more efficient solids control equipment function. A secondary benefit of CITRIC ACID is the formation of sodium citrate, a thinner. This helps counteract the flocculating influence of the hydrogen ions on first being introduced to the drilling fluid system.
Application – Pipe cleaning in Aircraft
Safe Handling Recommendations
Utilize normal precautions for employee protection when handling chemical products. Use of appropriate respirator, gloves, goggles, and apron is recommended for employee comfort and protection. See Material Safety Data Sheet (MSDS) for this product prior to use.
Typical Physical Properties
Physical Appearance………White powder or clear liquid
Specific Gravity……………..1.542
Bulk Density…………………63 lb/ft³
Hygroscopic…………………slightly
pH in water………………….1.87
Packaging
CITRIC ACID is packaged in 25 kgs multi-wall bags.
Citric Acid in 25 kg bags
| Application: | Additive for drilling and work over fluids for iron sequestration |
| Scientific name: | Citric Acid |
| Appearance: | Free flowing white solid crystalline powder |
| Safety, hazard: | Non-combustible, toxic fumes |
| Environmental, hazard: | Insignificant. Toxic to aquatic life |
| Waste disposal procedures: | At controlled landfill site |
| Form of supply: |
25 kg bags |
Citric Acid Anhydrous
Molecular Formula C6H8O7
Molecular Weight 192.13
CAS Number 77-92-9
Product Specifications
Assay (%) 99.5 – 100.5
Water (%) 0.5 max
Identification Passes USP/FCC tests
Residue on Ignition (%) 0.05 max
Oxalate/Oxalic Acid (%) 0.036 max
Sulfate (%) 0.015 max
Arsenic (ppm) 1 max
Heavy Metals (ppm) 5 max / FCC IV Ed.
Lead (ppm) 0.5 max
Readily Carbonizable
Substances Passes USP and FCC tests
Tridodecylamine (ppm) 0.1 max
Color & Clarity Passes USP Tests
Particle Size Distribution
Granular Max. 1% on U.S. No. 16 sieve Max. 10% through U.S. No. 50 sieve
Fine Granular Max. 1% on U.S. No. 30 sieve Max. 5% through U.S. No. 100 sieve
Powder Max. 5% on U.S. No. 60 sieve Min. 25% through U.S. No. 200 sieve
Bulk Densities Granular 56 (lbs/ft3 ) Fine Granular 54
Packaging 25 Kg : Polyethylene-lined multiwall paper bags: 50 lb (22.7 Kg) Polyethylene-lined multiwall paper bags
Shelf Life and Storage
We recommend that product held for more than 5 years be reevaluated for fitness of use. Anhydrous Citric Acid is slightly hydroscopic and should be stored under conditions of low temperature and low humidity in airtight containers to prevent caking.
Uses
CITRIC ACID is primarily used as a pH buffer, a low solids, non-dispersed, low pH drilling fluid
29181300
CITRIC ACID is a source of hydrogen ions (H+) used to reduce the pH of a drilling fluid. Both liquid and powdered.
Benefits
CITRIC ACID is primarily used to quickly reduce the pH in drilling fluid. One of the benefits of using Citric Acid is that it forms Sodium Citrate in the presence of Sodium based polymers such as DMA and OMNIPOL II. Sodium Citrate acts as a dispersant in water based fluids, helping to control the rheology. A third benefit of CITRIC ACID is the reduced hazard to personnel when compared to other acids normally used in drilling applications. CITRIC ACID will not reduce hardness levels in drilling fluids as will phosphoric acid.
Treatment
CITRIC ACID is added through the hopper when using the dry material, and added directly to the drilling fluid when using the liquid. A diaphragm-metering pump may be utilized with the liquid for continuous pH control.
Treatment levels vary with the concentration of salts, particularly hydrogen (H+) and hydroxide (OH- ).
Function
CITRIC ACID provides a layer of hydrogen ions around active clays, reducing their zeta potential and thus reducing their ability to imbibe water. This function translates to fewer solids, less swelling of the solids in the drilling fluid, reduced wellbore swelling, and more efficient solids control equipment function. A secondary benefit of CITRIC ACID is the formation of sodium citrate, a thinner. This helps counteract the flocculating influence of the hydrogen ions on first being introduced to the drilling fluid system.
CITRIC ACID CR20A
Application Pipe cleaning in Aircraft
