Formwork Release Agent for Concrete manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Formwork Release Agent for Concrete at a competitive price from us. We have ready stock of White Spirit in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
ReleasePro Formwork Release Agent is a specifically designed combination of low viscosity hydro carbon carrier mineral oils, chemicals, and a chemically active release agent that facilitates the effortless release of form work and gives concrete a high-quality finish.
For a clean release, it works well on shutter faces and molds before concrete is cast. following the formwork's removal. There are fewer blow holes and a smooth, consistent finish to the applied concrete surface.
Mixrelease. ReleasePro Formwork Release Agent reacts with cement to give treated surfaces superior release qualities.
#FormworkReleaseAgentforConcrete
#FormworkReleaseAgentforConcreteManufacturerUAE
#FormworkReleaseAgentforConcreteOMAN
#FormworkReleaseAgentforConcreteINDIA
Advantages of using RXSOL ReleasePro Formwork Release Agent
- Works well with all cement variety
- Very economical as it reduces labor
- Reduces chances of damage to formwork
- Fit for plastic-faced molds and formwork made of steel, wood, and plastic
- Contains specially formulated corrosion and rust inhibitors
| Physical state | Liquid |
| Colour | Colorless, to, yellow |
| Odor | Stinging, hydrocarbon-like |
| Melting point/freezing point | Melting point/range: < -20 °C - ASTM D 97-66 - (External MSDS) |
| Initial boiling point and boiling range | 150 - 200 °C |
When using a new mold, ReleasePro Formwork Release Agent can be applied directly to the mold; however, when using an old mold, any adhering material residue needs to be removed using the appropriate techniques before using the mold. Applied with a roller, brush, or spray.
Unsealed timber surfaces should be recoated if a delay in using the mould causes the release agent to seep into the timber. Non-absorbent surfaces only need to be applied once.
Although the dosage or covered area is according to the mould surface, on an average ReleasePro Formwork Release Agent convers 50-70 meter sq per ltr
