Skip to main content

Style Options

Layout Style

Colors schema

Direction

+254751021020 mail@kenyachemical.com Search :

ALKAA TUFF HIGH FOAM DETERGENT manufacturer and supplier in nairobi kenya africa

ALKAA Tuff High Foam Detergent Very effective emulsifier - based cleaner for use in hold cleaning and general degreasing. its heavy molecular surfactants rapidly reacts with water and produce effective cleaning solution. May be applied by brush, hand spray and by high and low pressure washing machines.
It is a heavy duty non corrosive concentrated cleaning compound soluble in fresh and salt water, Also suitable with high pressure cleanig machines. Ideal for difficult cleaning problems faced in industrial and other plants,  Very effective degreaser which removes dirt, oil and grease from the equipment, parts, components, engines, floors and walls etc. 

For degreasing and removal of residues of mimerals oil , coal stain and soot from surface.

Safety Phrases
S-2 Keep out of the reach of children.
S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S-45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

Helpfull Item during Hold Cleaning operration...

1. High Pressure Hold Cleaning Gun 

2. Wash down hoses, 20 meter length, 45 mm dia complete with

coupling for ship’s fire main  ::: 6 Nos.

3. Plastic jet nozzles suitable for above hoses 4 Nos

4. Wilden Pump 

5. High pressure fresh water machine with extended handle & 30 meter of pressurised hose

6. Sufficient fresh water to complete a high pressure water rinse for all holds 100 M/T for 5 hold vessel

7. Telescopic Ladder to extend approx. 5 meters 3 Nos.

8. Long Handle Steel Scrappers 8 Nos.

9. Long Handle rubber squeegee complete with 1 meter rubber blade 6 Nos.

10. Heavy duty brooms suitable for Hold Cleaning 12 Nos.

11. Corn brooms with handle 8 Nos.

12. Heavy duty mops 6 Nos.

13. Spare Mop Heads 6 Nos.

14. Galvanized roller winger, mop buckets 4 Nos.

15. Turks heads, round head 4” 6 Nos.

16. Steel Hand Shovel, 6” wide, suitable for digging out hold bilges 6 Nos.

17. Soogee cloth, 25 Meter length, width approximately 30 cm 3 Nos.

18. Burlap, 50 Meter length X 1 Meter wide 1 Roll

S/L Item Quantity

19 Duct tape, grey, Industrial strength, 20 meter length X 45 mm diameter 6 Nos.

20. Transparent plastic, reinforced garden hose, complete with male and female plastic coupling for each sections 4 Nos

21. Portable Halogen lights, 500 watt, to illuminate holds during cleaning. Each lamp to be complete with 50 meters of cable and have a waterproof plug fitted 4 Nos.

22. Spare Halogen Bulbs for above 10 Nos.

23. ALKAATUFF or other cleaning agent (if previous cargo was coal) for 5 holds

24. Telescopic Ladder to extend approx. 5 meters 3 Nos.

25. Muriatic Acid/Hydrochloric Acid (if previous cargo was Cement) with protective equipment 6 Nos.

26. Rags 200 kg

3 Pieces of Good Advice:
Apply  ALKAA Tuff High Foam Detergent on the dry surface where possible! A dry surface will absorb far better than a wet surface. When applying ALKAATUFF High Foam Detergent on vertical surfaces: Start application from the bottom and work upwards! If beginning from the top and going downwards, the ALKAATUFF High Foam Detergent may produce "channels" down the surface, thereby running too fast off the surface. During high-pressure cleaning: It is important that the rinsing water does not run over non-cleaned surfaces! The rinsing water can draw soap from the surface if running over non-cleaned surfaces. High pressure together with the optimum concentration of ALKAATUFF High Foam Detergent will give the best effect .

Directions for Use and Dose Rates:
General Cleaning:- ALKAA Tuff High Foam Detergent can be used for all types of cleaning &  degreasing & may be applied by  Brush, Hand spray, high and low pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. will suffice for   most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on degree of contamination ALKAA Tuff High Foam Detergent should be mixed with warm water at a rate of 50-200 ml   per 10 litres. i.e. 1 cup of ALKAATUFF to a bucket of water. An ALKAA Tuff High Foam Detergent solution can be applied simply by mops, brushes or rags, or by dipping the soiled articles into the ALKAA Tuff High Foam Detergent solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, ALKAA Tuff High Foam Detergent is not recommended for washing machines.                        

Tank Cleaning:-Cargo tank cleaning to remove residues of Mineral, Animal, Vegetable or Fish oil, Waxes  &  Soot from inert gas systems.

Method of Application and Dose Rates:-

  • Direct injection method for tank washing machines. Dose rate 1-5 litres per ton wash water (0.1-0.5%).
  • Recirculation method. Dose rate 1-7 litres per ton wash water (0.1-0.7%).
  • Spot cleaning. Hand spray neat or diluted with up to 5 parts water and leave for several minutes before rinsing off with clean water.

Cleaning of Cargo Tanks to Remove Soot from Inert Gas Systems:-

  • Spray ALKAA Tuff High Foam Detergent on with a high-pressure cleaning machine and use 1:6 with water. If used with the hand sprayer, spray the product neat onto the surface, allowing 1 lit. for every 12 m2. Use a 5-8% solution in a tank washing machine.
  • Leave for about 30-45 minutes. The surface should be kept wet.
  • Wash down with hot water (80°C) and check the cargo tank.
  • Repeat the procedure if necessary.

Note:- Whenever possible, the cleaning solution should be heated to 60-80°C.If this method is not possible, other conventional methods such as separate rate direct injection, recirculation or hand spraying provide acceptable options.For boiler fire side cleaning, a 10-20 % hot solution, (temp. above 40°C), should be sprayed on to the surfaces to be cleaned. Allow to penetrate for 20 minutes and flush off. For deposits which are very hard to remove, increase the concentration to 50% and repeat if necessary.

ALKAA Tuff High Foam Detergent concentrate is very effective detergent heavy-duty water based alkaline cleaner. It has numerous cleaning applications including removal of greases, waxes, vegetable and animal oils, RXSOL brand name is very popular as a manufacturer and supplier of  ALKAATUFF High Foam Detergent . And our company is having stock point in INDIAN - Middle East coastal. Our major hub of stock point is Knadla, Mundra, JNPT, Pirpava, Surat, Hazira, Dahej, Goa, Manglore, Kochin, Kakinada, Visakhapatnam, Ganngavaram, Ennore, Chennai, Kolkata, Haldia, Buz Buz, Pirpav, Fujairah, Dubai, Jabel Ali, Sharjah, Abu Dhabi and also supplying entire Gulf.

RXSOL ALKAA Tuff High Foam Detergent is also readily available with major stockist and shipchandler for easy distribution of material on local terms basis.

TAGS

 

X

Request for Quote and Get Heavy Discount on Price