Cement Floor Cleaner gives new surface floor effect as Over time, concrete surfaces such as patios, driveways and sidewalks, will experience hard-to-remove stains. Rust, grease and oil buildup, sometimes cannot be removed with everyday cleaning products
Remove Stains With RXSOL Cement Cleaner
Step 1 : Dilute the RXSOL cement cleaner with one part to 10 parts water in a plastic bucket not in metal bucket.
Step 2 : Apply the diluted RXSOL cement cleaner to the stained area using a scrub brush or a plastic sprayer that you can dispose of after ward. Let the solution stand for five minutes and then apply again until the stain has been removed.
Step 3 : Rinse thoroughly with a water hose and attached sprayer to clean residue. Let the area dry for 24 hours.
Step 4 : Apply a sealant to your concrete to avoid any future stains.
Preacution: Make sure to spray away from any plants or grass. Water all plants in the nearby area and then cover them for extra protection. If not, the acid can burn the plants.
Read and follow the instructions carefully as per MSDS guideline.
Wear safety goggles, respirator-mask, long-sleeved shirt, pants, rubber boots and acid-resistant gloves.
Always keep Full bucket with water just in case the CLEANING solution gets on your skin or eyes. You will need to wash the area immediately. Also, keep baking soda and lime available to help neutralize the solution strength.
If you are planning to use indoors then you need proper ventilation for it can burn your eyes and throat.
