Excellent for removal of oil and grease. Readily soluble in water in all proportions. It is a unique formulation blended from inorganic, organic compounds and detergents with powerful dispersing agents and aliphatic petroleum distillates. It is non-corrosive to metal like copper, aluminium, mild steel and plastic. It is non-toxic which makes handling easy.
Ideal for use where chlorinated solvents are undesirable or prohibited.
PROEDURE OF USE:-
1st Method:-
Mix 1 part of RXSOL-10-1005-025 with 2 -10 parts of water / GAS-OIL , For heavy oil,greasy surface use directly)Spray directly on the entire surface to be cleaned. This can be achieved by Hand spray / mechanical spray pump. Immediately after 2 -5 minute of spray the RXSOL-10-1005-025 starts its function. The Dirt, oil grease etc will loosen. 5 to 6 minutes after spraying start rinsing the system with water (High pressure recommended). Dirt and mud starts vanishing with cleaning media and water.
2nd Method:-
Application in immersion process with or without ultrasonic support, manual wipping.
3rd Method:-
RXSOL-10-1005-025 is also used in conjunction with alkaline degreasing bath at 3-5% (v/v) concentration for better and quick degreasing action. Eithers the bath is heated to be 70c or the solution can be stirred or air agitated.
We supply all marine chemicals products & Lubricants .We arrange to supply Shell /Castrol /Servo / Mobil oils, EP2 Grease, Molykote, Molyslip, Aerosol, Silicone, Petrol, Paraffin oil, coal tar, fish oil, tallow, turpentine, white spirit, Teflon coating, Rustolvo, silicon grease, aerosol spray, molyslip, copaslip, greases, degreaser etc...
RXSOL-10-1005-025 is easily soluble in water Action is quite fast even at low temperature which gives advantages of cleaning under operation And avoid shut down and down time.
Non corrosive to most of the metals / plastics.
Gives clear finish to the surface .
Lower cost due to high concentration
Use undiluted for heavily soiled component
